HANDMADE IN THE USA BY A TINT FAMILY
PEEL whereverthe tint takes you.
The Original Mobile Peel Board is a peel surface that leans against the vehicle, the wall, a packout, or any supporting surface you feel comfortable with... set up in 15 seconds, right beside the job! It packs into its carry bag and fits in any trunk or back seat. The first patent-pending mobile peel board of its kind.
($399 + shipping · 10-day Batch 1 pre-order window opens 10/8/26 and ends 10/18/26. All Batch 1 orders will ship no later than 45-60 days from batch close.)
2 boards unlocks free shipping
Batch 1 closes in--d --h --m --s
12 lbs
Board weight — 15 lbs packed in the bag
15 sec
From unzipping the bag to fully set up
28" × 54"
Usable peel surface — 30" W × 62" H overall
$399
+ shipping — less than one full sedan tint job
The mobile peelboard
the peelboard built for the work
away from the peelboard.
Most shops have a wall-mounted board. But the job doesn't always happen next to it. Dealer runs, body shop visits, parking-lot brows, and cars rolling in covered in road salt all call for a peel surface right beside the vehicle. This is the mobile board for exactly that.
Every second counts
The moment the liner separates, static-charged adhesive starts pulling in airborne dust and lint. Peeling across the shop means carrying exposed film through moving air. Peeling right at the door reduces exposed adhesive time to seconds.
Cut against the board, not the glass
Hand-cutting against the vehicle's glass risks scoring a customer's window. A peel board is the safer surface to trim against; and now that surface travels anywhere.
Winter is contamination season
Vehicles roll in covered in road salt, ice, & snow. A clean peel surface beside the door is the alternative to peeling from the salty vehicle surface... whether mobile, or in-shop.
The board
LIGHTWEIGHT. PROFESSIONAL. effective.
perfect FOR ANY ENVIRONMENT.
Leans against anything
Lean it against the vehicle entry, a wall, or a packout! Securing it to a packout is recommended.
1" sizing grid
Inch markings run along the top and side of the frame for fast, accurate sizing during a hand cut.
Planted, pivoting base
Pivoting rubber feet stay firmly planted on driveways and shop floors, and there's no metal above the foot to scratch customer paint or glass.
Packs into any car
Slides into its foam-insulated carry bag and fits in the trunk or back seat of any vehicle — no work van or truck required.
Sized for real work
The 28" × 54" usable surface holds 1-piece windshield brows, full pickup truck back-glass, and most sedan or SUV rear glass. Cutting door windows? Spray slip solution between each piece and stagger-stack the whole set on the board.
Fully modular, built to last
Every part can be fixed or replaced if anything ever breaks. The durable peel surface is meant to be cut on, and when it's seen years of blades, replacement panels will be available to keep the board in service.
How it works
THREE STEPS. RIGHT AT THE DOOR.
Set up in 15 seconds
Unzip the carry bag and lean the board against the nearest comfortable suraface. Securing it to a packout is best if uncomfortable leaning against the vehicle.
Spray and stick
Mist the surface with your standard slip solution and the film clings flat- same as any peel board. Zero learning curve.
Cut, peel, install
Trim by hand against the board instead of the vehicle's glass, peel the liner seconds from the window, and carry it straight to the install.
The carry bag
BUILT TO PROTECT. MADE TO TRAVEL.
Arguably half of what makes this package worth its price. The carry bag is every bit as high quality as the board itself — and like the board, it's handmade in the USA. Most importantly, this bag keep your board clean!
- Every panel is foam insulated to protect the board in transit
- Foam-insulated fabric separator between the panels prevents noise and damage
- Leather-wrapped carrying handle
- Detachable shoulder strap
- Fits in the trunk or back seat of any vehicle
Unzip it at the job and the board is out and set up in 15 seconds. The bag is what turns this from a shop peel board into a mobile one.
In the field
NOT JUST FOR MOBILE TINTERS.
Keep your wall board - this isn't a replacement, it's the companion for every job away from it. Throwing on a brow in the parking lot, running to a dealership or body shop for quick work, or just wanting a peel surface close to the vehicle when a rolling peel board is not present... this is the tool.
- Dealership and body shop runs
- Parking lot brows and quick off-site work
- Winter road-salt season - peel away from the salt
- Works with plotted patterns or hand-cut film
The Original Mobile Peel Board is the tool the industry has been missing!
FAQ
QUESTIONS FROM INSTALLERS.
How does the film stay on the board?+
The same way it does on any peel board — spray the surface with your standard slip solution and the film clings flat. No clamps, tape, or magnets, and zero learning curve.
What can I fit on it?+
The 28" × 54" usable peel surface holds 1-piece windshield brows, full pickup truck back-glass, and most sedan or SUV rear glass. For door windows, spray between each piece and stagger-stack the set.
Will it fit in my car?+
Yes. Packed in its bag it fits in the trunk or back seat of any vehicle — no work van or truck required. The board weighs 12 lbs, 15 lbs in the bag.
I have a shop wall board — why do I need this?+
It's not a replacement, it's the companion for everything away from the wall: dealer runs, body shop work, parking lot brows, and keeping film away from winter road salt. And if you simply want a peel surface close to the vehicle, it does that without costing twice as much as a rolling board that can't be transported.
What if something breaks?+
The board is fully modular — every part can be fixed or replaced, including the peel surface itself. It's built to stay in service for years.
When will my board ship?+
Batch 1 pre-orders are open for a 10-day window and ship between November 15 and December 1st. Orders placed after Batch 1 will begin shipping in December 2026 in the order they are received.
Batch 1 pre-order — 10-day window
BE FIRST to peel.
$399 + shipping - the price of a roll of film! It pays for itself on day one.
Full payment at checkout. $399 + shipping · 10-day Batch 1 pre-order window opens 10/8/26 and ends 10/18/26. All Batch 1 orders will ship no later than 45-60 days from batch close.
2 boards unlocks free shipping
Batch 1 pre-order window closes in
--
Days
--
Hours
--
Minutes
--
Seconds